Properties

* Approval not requested

Note

This Technical Datasheet is considered being accurate at the date of printing. It has been compiled with the utmost care, but Chief Oil International B.V. cannot accept any responsibility for damage, of any kind, that may be caused by using these data or the product concerned. The information in this publication may not be considered as any guarantee of specific properties.

Force Antifreeze Plus

Description: Force Antifreeze plus, mixed with the appropriate amount of water – is used as a cooling and heat transferring fluid in combustion engines. Force Antifreeze Plus is an ethylene glycol based fluid that provides maintenance-free protection against freezing and boiling but also against corrosion. The product is in accordance with the VW specifications.

Extended coolant life, often for the whole life of the engine or vehicle, is obtained through the use of non-depleting corrosion inhibitors.

Application: Force Antifreeze Plus provides long-life frost and corrosion protection. To ensure good corrosion protection it is recommended to use at least 33 vol. % of Force Antifreeze Plus in the coolant solution. This provides frost protection up to -20°C. Typical mixtures are 50/50, offering frost protection up to -35°C.

Mixtures with more than 70 vol. % Force Antifreeze Plus in water are not recommended. The maximum frost protection (about -69°C) is obtained at 68 vol. % Force Antifreeze Plus.

Force Antifreeze Plus is especially recommended for VW and hi-tech engines where aluminiumprotection against high temperatures is important.

Specifications*

FORD WSS-M97B44-D
Scania TB1451
DAIMLER-CHRYSLER 325.3
MAN324 type SNF
AUDI/SEAT/VW/SKODA TL-774 (G12)
GM 6277M
ASTM D3306 D44656 D4985

MSDS