Inca Dot 4
Inca Dot 4

Properties

- Can be mixed with other brake fluids of the same quality level and components. Not to be mixed with silicone type or silicate ester type brake fluids.
- Very high boiling point (wet and dry).
-Strongly hygroscopic.
- Applicable with all classic brake-packing materials.
- Can be used throughout the whole year.

* Approval not requested

Note

This Technical Datasheet is considered being accurate at the date of printing. It has been compiled with the utmost care, but Chief Oil International B.V. cannot accept any responsibility for damage, of any kind, that may be caused by using these data or the product concerned. The information in this publication may not be considered as any guarantee of specific properties.

Inca Dot 4

Description: Inca DOT 4 is a high performance brake and clutch fluid meeting or exceeding SAE J1704 and FMVSS No. 116 DOT 4 and ISO 4925 Class 4 specifications. Inca DOT 4 is manufactured from synthetic components (polyglycols, mono-alkylether and certain inhibitors).

Application: In brake fluid systems of almost every car (passenger cars, trucks, busses and vans). In certain operating systems of the coupling. In certain tractor brake systems. In certain truck cabin turnover systems.

Specifications*

DOT 4
FMVSS N°116
SAE J 1704
ISO 4925 Class 4

Typical analysis

Density at 20°C  :  1.040 - 1060
Viscosity at 40°C  :  824 cSt
Viscosity at 100°C  :  2.2 cSt
Dry boiling point °C  :  280
Wet boiling point °C  :  167
pH  :  8.1
Appearance  :  Clear liquid