This Technical Datasheet is considered being accurate at the date of printing. It has been compiled with the utmost care, but Chief Oil International B.V. cannot accept any responsibility for damage, of any kind, that may be caused by using these data or the product concerned. The information in this publication may not be considered as any guarantee of specific properties.
Mohican Dexron-III
Description: ATF designed to protect most passenger car, van and light truck automatic transmissions.
Application: Wherever DEXRON III, DEXRON II-E, DEXRON II, DEXRON or Type A fluids are recommended. Wherever MERCON, M2C138-CJ or M2C166-H fluids are recommended. In all automatic transmissions built by GM. Wherever Allison C-4 fluids are required. May be used in some hydraulic and compressor systems where excellent low temperature flow ability is required.
Specifications*
Dexron III G-34014
MB 236.9
Ford Mercon M940209
VOITH
Allison C-4 20952194
Typical analysis
Density at 15°C
:
0.865
Viscosity at 40°C
:
33 cSt
Viscosity at 100°C
:
7.5 cSt
Viscosity index
:
197
Pour point
:
– 48 °C
Flash point
:
190°C
Colour
:
Red
Additional savings: that result from using just one fluid for most automatic transmission applications.
Oxidation resistance: product is formulated with excellent base stocks and special additives that minimize deterioration of the fluid through use.
Improved low temperature fluidity : excellent protection against wear during cold operating conditions and helps eliminate cold start stalling.
Transmission cleanliness: The additives prevent formation of deposits which affect the performance of delicate control valves.
Viscosity index: Excellent performance over a wide range of temperatures is possible through the use of high VI base oils along with a shear stable VI improver.
Force Coolant is a product based on mono-ethylene glycol, demineralised water and additives that during the whole year takes care of an efficiënt and good cooling of gasoline, diesel and LPG engines with open or closed cooling systems.
High quality EP-type hydraulic oil on basis of carefully selected solvent refined mineral base oils with a high natural viscosity index, to which special ashless type additives have been added.
Campa GL-3 Industrial gear oils are proven and accepted EP lubricants. They are excentionally stable pver a wide range of temperatures, have a high loadcarrying capacity and separate quickly from water.