Nambe Euro UHPD SAE 10W40

Properties

- very good detergency and very strong dispersion
- strong anti-corrosion and anti-foam properties
- high and stable natural viscosity index
- low sulphated ash, phosphor and sulphur content (low SAPS)
- excellent protection against wear, which strongly reduces wear of
- piston-rings and cylinder-liners.

* Approval not requested

Note

This Technical Datasheet is considered being accurate at the date of printing. It has been compiled with the utmost care, but Ruscoforce NV cannot accept any responsibility for damage, of any kind, that may be caused by using these data or the product concerned. The information in this publication may not be considered as any guarantee of specific properties.

Nambe Euro UHPD SAE 10W40

Description: Nambe Euro is a semi-synthetic “Ultra High Performance Diesel” engine oil, based on the latest “low SAPS” additives technology.
The oil is specifically developed for heavy duty diesel engines, used in trucks and coaches meeting the most stringent European EURO-4 emission prescriptions.

Application: Nambe Euro gives a perfect year round lubrication to heavy duty diesel engines used under the most demanding operation conditions. It is suitable for application in the EGR engines with or without particulate filters.

Specifications*

ACEA E7 / E6 / E4
API CI-4
MB 228.5 / 228.51
DF Long Drain
MAN M 3277 / M 3277 CRT / M 3477
Volvo VDS-3
Renault RXD
MTU Type 3 / 3.1

Typical analysis

Density at 15°C  :  0,858
Viscosity at 40°C  :  95,2 cSt
Viscosity at 100°C  :  13,9 cSt
Viscosity at -25°C  :  6610 cP
Viscosity index  :  149
Pour point  :  -29°C
Flash point  :  214
TBN  :  10 mg KOH/g
Sulphated ash  :  0,99%

MSDS

 MSDS Nambe Euro UHPD SAE 10W40