Chief Oil
Chief Oil International
Chief Oil International

Nambe Synthetic UHPD SAE 5W30


- Strong dispersant and detergent motor oil.
- Offers good protection against corrosion
- Relatively high and stable viscosity index.
- Low sulphated ash number.
- Protection against “Bore polishing“ and wear.
- Very long drain intervals.
- Excellent lubrication during every season.

* Approval not requested


This Technical Datasheet is considered being accurate at the date of printing. It has been compiled with the utmost care, but Chief Oil International B.V. cannot accept any responsibility for damage, of any kind, that may be caused by using these data or the product concerned. The information in this publication may not be considered as any guarantee of specific properties.

Nambe UHPD SAE 10W40

Description: Highly powered, newest formula, fuel economy truck engine oil, specially developed to meet the most severe lubrication requirements of European heavy duty diesel engine manufacturers and in particular, the lubrication needs of the latest generation low emission engines.

Application: Nambe is the right product for the most severe heavy work in the modern truck. Particularly suitable for working under high thermal load and extended drain intervals.


CUMMINS CES 20077 / 78
ACEA E4 / E7
Scania LDF-2
MB 228.5
MAN M 3277
MTU DDC Type 3

Typical analysis

Density at 15°C  :  0,875
Viscosity at 40°C  :  95 cSt
Viscosity at 100°C  :  14,5 cSt
Viscosity at -25°C  :  6400 cP
Viscosity index  :  156
Pour point  :  -30°C
Flash point  :  220°C
TBN  :  12.5 mg KOH/g
Sulphated ash  : 

1,6 % mass


 MSDS Nambe UHPD SAE 10W40

View similar features